Cyclone dust collector

Introduction

Cyclone dust collector is composed of intake pipe, exhaust pipe, cylinder, cone and ash bucket. Cyclone dust collector has been widely used to separate solid and liquid particles from the air stream, or to separate solid particles from the liquid. Under ordinary operating conditions, the centrifugal force acting on the particles is 5 to 2500 times of gravity, so the efficiency of the cyclone dust collector is significantly higher than that of the gravity sedimentation chamber, and the cyclone dust removal device with a dust removal efficiency of more than 90% has been successfully researched on the basis of this principle. In the mechanical dust collector, the cyclone dust collector is the most efficient one. It is suitable for the removal of non-viscous and non-fibrous dust, mostly used to remove particles above 5μm, and the parallel multi-tube cyclone dust collector device also has 80 ~ 85% dust removal efficiency for particles of 3μm. From the technical and economic aspects, the pressure loss control range of cyclone dust collector is generally 500 ~ 2000Pa. Therefore, it belongs to the medium efficiency dust collector.